Original Garage Moto OG Lowrider S & ST Drop 1" Triple Trees Kit For Harley Softail Low Rider 2020-2026
Original Garage Moto OG Lowrider S & ST Drop 1" Triple Trees Kit For Harley Softail Low Rider 2020-2026
Product Details
The first image matches the product. Other colors or finishes may be included to show options available for order.
Description
the OG 2020-Up Softail Lowrider S & ST Drop 1" Triple Trees kit is the ultimate performance Softail front-end upgrade. It is engineered to maximize performance & rigidity featuring taller fork tube clamping sections and a thicker cross-section over the stock trees.
This Triple Trees kit will allow you to lower your fork up to 1", which will raise your bike height and provide better ground clearance. This is a great alternative for those looking for a more aggressive stance. Works well with longer 13.5" & 14" rear shocks.
It will allow you to set your Risers exactly where you want them with three mounting location options; Stock, +1'' & +2'' pullback towards the rider (+1” Adapters (H-AC-53-BK) are sold separately).
Also features wire management clamps for that clean install and factory look. Available in all colors, including chrome finishes.
Features
- 1" Drop feature
-
Precision CNC machined 6061 T6 aluminum trees
- Stem axle machined from 4140Chromoly Steelfor superior strength
- Includes the OG M8 Softail Billet Fork Stem Cap (H-AC-126-BK) (H-AC-126-AL) (H-AC-126-CR) (H-AC-126-GD)
- Designed to match the OEM rake angle and triple tree offset ensuring a straightforward installation and maximizing performance
- Improved structural rigidity
- Hard Anodized finish & Chrome finishes
- Machined OG logo
- Uses standard M8 Softail bushings
- Stainless steel hardware included
-
Includes two Wire management clamps (one on both sides)
- Innovative reversible Risers mounting Block allows three risers positions; stock, +1'' or +2” pullback towards the rider. +1” Adapters (H-AC-53-BK) are sold separately
Notes
- Fits all 2020 to present Softail Lowrider S (FXLRS) & ST (FXLRST) models with OEM inverted front end
- Will not fit Softail Lowrider S (FXLRS) stock headlight fairing
- Depending on the height of your risers, you may need cable or harness extensions, especially when using the +2” pullback mounting location
*If your motorcycle is equipped with a T-Sport Fairing, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees (H-AC-147-BK) (H-AC-125-BK) (H-AC-124-BK) in order to run your T-Sport Fairing with the OG Top Triple Tree.
Installation
Click here for installation instructions
Selected options: Color: Black
The first image matches the product. Other colors or finishes may be included to show options available for order.
Description
the OG 2020-Up Softail Lowrider S & ST Drop 1" Triple Trees kit is the ultimate performance Softail front-end upgrade. It is engineered to maximize performance & rigidity featuring taller fork tube clamping sections and a thicker cross-section over the stock trees.
This Triple Trees kit will allow you to lower your fork up to 1", which will raise your bike height and provide better ground clearance. This is a great alternative for those looking for a more aggressive stance. Works well with longer 13.5" & 14" rear shocks.
It will allow you to set your Risers exactly where you want them with three mounting location options; Stock, +1'' & +2'' pullback towards the rider (+1” Adapters (H-AC-53-BK) are sold separately).
Also features wire management clamps for that clean install and factory look. Available in all colors, including chrome finishes.
Features
- 1" Drop feature
- Precision CNC machined 6061 T6 aluminum trees
- Stem axle machined from 4140Chromoly Steelfor superior strength
- Includes the OG M8 Softail Billet Fork Stem Cap (H-AC-126-BK) (H-AC-126-AL) (H-AC-126-CR) (H-AC-126-GD)
- Designed to match the OEM rake angle and triple tree offset ensuring a straightforward installation and maximizing performance
- Improved structural rigidity
- Hard Anodized finish & Chrome finishes
- Machined OG logo
- Uses standard M8 Softail bushings
- Stainless steel hardware included
- Includes two Wire management clamps (one on both sides)
- Innovative reversible Risers mounting Block allows three risers positions; stock, +1'' or +2” pullback towards the rider. +1” Adapters (H-AC-53-BK) are sold separately
Notes
- Fits all 2020 to present Softail Lowrider S (FXLRS) & ST (FXLRST) models with OEM inverted front end
- Will not fit Softail Lowrider S (FXLRS) stock headlight fairing
- Depending on the height of your risers, you may need cable or harness extensions, especially when using the +2” pullback mounting location
*If your motorcycle is equipped with a T-Sport Fairing, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees (H-AC-147-BK) (H-AC-125-BK) (H-AC-124-BK) in order to run your T-Sport Fairing with the OG Top Triple Tree.
Installation
Click here for installation instructions
Selected options: Color: Aluminium
The first image matches the product. Other colors or finishes may be included to show options available for order.
Description
the OG 2020-Up Softail Lowrider S & ST Drop 1" Triple Trees kit is the ultimate performance Softail front-end upgrade. It is engineered to maximize performance & rigidity featuring taller fork tube clamping sections and a thicker cross-section over the stock trees.
This Triple Trees kit will allow you to lower your fork up to 1", which will raise your bike height and provide better ground clearance. This is a great alternative for those looking for a more aggressive stance. Works well with longer 13.5" & 14" rear shocks.
It will allow you to set your Risers exactly where you want them with three mounting location options; Stock, +1'' & +2'' pullback towards the rider (+1” Adapters (H-AC-53-BK) are sold separately).
Also features wire management clamps for that clean install and factory look. Available in all colors, including chrome finishes.
Features
- 1" Drop feature
- Precision CNC machined 6061 T6 aluminum trees
- Stem axle machined from 4140Chromoly Steelfor superior strength
- Includes the OG M8 Softail Billet Fork Stem Cap (H-AC-126-BK) (H-AC-126-AL) (H-AC-126-CR) (H-AC-126-GD)
- Designed to match the OEM rake angle and triple tree offset ensuring a straightforward installation and maximizing performance
- Improved structural rigidity
- Hard Anodized finish & Chrome finishes
- Machined OG logo
- Uses standard M8 Softail bushings
- Stainless steel hardware included
- Includes two Wire management clamps (one on both sides)
- Innovative reversible Risers mounting Block allows three risers positions; stock, +1'' or +2” pullback towards the rider. +1” Adapters (H-AC-53-BK) are sold separately
Notes
- Fits all 2020 to present Softail Lowrider S (FXLRS) & ST (FXLRST) models with OEM inverted front end
- Will not fit Softail Lowrider S (FXLRS) stock headlight fairing
- Depending on the height of your risers, you may need cable or harness extensions, especially when using the +2” pullback mounting location
*If your motorcycle is equipped with a T-Sport Fairing, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees (H-AC-147-BK) (H-AC-125-BK) (H-AC-124-BK) in order to run your T-Sport Fairing with the OG Top Triple Tree.
Installation
Click here for installation instructions
Selected options: Color: Chrome
The first image matches the product. Other colors or finishes may be included to show options available for order.
Description
the OG 2020-Up Softail Lowrider S & ST Drop 1" Triple Trees kit is the ultimate performance Softail front-end upgrade. It is engineered to maximize performance & rigidity featuring taller fork tube clamping sections and a thicker cross-section over the stock trees.
This Triple Trees kit will allow you to lower your fork up to 1", which will raise your bike height and provide better ground clearance. This is a great alternative for those looking for a more aggressive stance. Works well with longer 13.5" & 14" rear shocks.
It will allow you to set your Risers exactly where you want them with three mounting location options; Stock, +1'' & +2'' pullback towards the rider (+1” Adapters (H-AC-53-BK) are sold separately).
Also features wire management clamps for that clean install and factory look. Available in all colors, including chrome finishes.
Features
- 1" Drop feature
- Precision CNC machined 6061 T6 aluminum trees
- Stem axle machined from 4140Chromoly Steelfor superior strength
- Includes the OG M8 Softail Billet Fork Stem Cap (H-AC-126-BK) (H-AC-126-AL) (H-AC-126-CR) (H-AC-126-GD)
- Designed to match the OEM rake angle and triple tree offset ensuring a straightforward installation and maximizing performance
- Improved structural rigidity
- Hard Anodized finish & Chrome finishes
- Machined OG logo
- Uses standard M8 Softail bushings
- Stainless steel hardware included
- Includes two Wire management clamps (one on both sides)
- Innovative reversible Risers mounting Block allows three risers positions; stock, +1'' or +2” pullback towards the rider. +1” Adapters (H-AC-53-BK) are sold separately
Notes
- Fits all 2020 to present Softail Lowrider S (FXLRS) & ST (FXLRST) models with OEM inverted front end
- Will not fit Softail Lowrider S (FXLRS) stock headlight fairing
- Depending on the height of your risers, you may need cable or harness extensions, especially when using the +2” pullback mounting location
*If your motorcycle is equipped with a T-Sport Fairing, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees (H-AC-147-BK) (H-AC-125-BK) (H-AC-124-BK) in order to run your T-Sport Fairing with the OG Top Triple Tree.
Installation
Click here for installation instructions
Selected options: Color: Gold
The first image matches the product. Other colors or finishes may be included to show options available for order.
Description
the OG 2020-Up Softail Lowrider S & ST Drop 1" Triple Trees kit is the ultimate performance Softail front-end upgrade. It is engineered to maximize performance & rigidity featuring taller fork tube clamping sections and a thicker cross-section over the stock trees.
This Triple Trees kit will allow you to lower your fork up to 1", which will raise your bike height and provide better ground clearance. This is a great alternative for those looking for a more aggressive stance. Works well with longer 13.5" & 14" rear shocks.
It will allow you to set your Risers exactly where you want them with three mounting location options; Stock, +1'' & +2'' pullback towards the rider (+1” Adapters (H-AC-53-BK) are sold separately).
Also features wire management clamps for that clean install and factory look. Available in all colors, including chrome finishes.
Features
- 1" Drop feature
- Precision CNC machined 6061 T6 aluminum trees
- Stem axle machined from 4140Chromoly Steelfor superior strength
- Includes the OG M8 Softail Billet Fork Stem Cap (H-AC-126-BK) (H-AC-126-AL) (H-AC-126-CR) (H-AC-126-GD)
- Designed to match the OEM rake angle and triple tree offset ensuring a straightforward installation and maximizing performance
- Improved structural rigidity
- Hard Anodized finish & Chrome finishes
- Machined OG logo
- Uses standard M8 Softail bushings
- Stainless steel hardware included
- Includes two Wire management clamps (one on both sides)
- Innovative reversible Risers mounting Block allows three risers positions; stock, +1'' or +2” pullback towards the rider. +1” Adapters (H-AC-53-BK) are sold separately
Notes
- Fits all 2020 to present Softail Lowrider S (FXLRS) & ST (FXLRST) models with OEM inverted front end
- Will not fit Softail Lowrider S (FXLRS) stock headlight fairing
- Depending on the height of your risers, you may need cable or harness extensions, especially when using the +2” pullback mounting location
*If your motorcycle is equipped with a T-Sport Fairing, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees (H-AC-147-BK) (H-AC-125-BK) (H-AC-124-BK) in order to run your T-Sport Fairing with the OG Top Triple Tree.
Installation
Click here for installation instructions
Selected options: Color: Red
The first image matches the product. Other colors or finishes may be included to show options available for order.
Description
the OG 2020-Up Softail Lowrider S & ST Drop 1" Triple Trees kit is the ultimate performance Softail front-end upgrade. It is engineered to maximize performance & rigidity featuring taller fork tube clamping sections and a thicker cross-section over the stock trees.
This Triple Trees kit will allow you to lower your fork up to 1", which will raise your bike height and provide better ground clearance. This is a great alternative for those looking for a more aggressive stance. Works well with longer 13.5" & 14" rear shocks.
It will allow you to set your Risers exactly where you want them with three mounting location options; Stock, +1'' & +2'' pullback towards the rider (+1” Adapters (H-AC-53-BK) are sold separately).
Also features wire management clamps for that clean install and factory look. Available in all colors, including chrome finishes.
Features
- 1" Drop feature
- Precision CNC machined 6061 T6 aluminum trees
- Stem axle machined from 4140Chromoly Steelfor superior strength
- Includes the OG M8 Softail Billet Fork Stem Cap (H-AC-126-BK) (H-AC-126-AL) (H-AC-126-CR) (H-AC-126-GD)
- Designed to match the OEM rake angle and triple tree offset ensuring a straightforward installation and maximizing performance
- Improved structural rigidity
- Hard Anodized finish & Chrome finishes
- Machined OG logo
- Uses standard M8 Softail bushings
- Stainless steel hardware included
- Includes two Wire management clamps (one on both sides)
- Innovative reversible Risers mounting Block allows three risers positions; stock, +1'' or +2” pullback towards the rider. +1” Adapters (H-AC-53-BK) are sold separately
Notes
- Fits all 2020 to present Softail Lowrider S (FXLRS) & ST (FXLRST) models with OEM inverted front end
- Will not fit Softail Lowrider S (FXLRS) stock headlight fairing
- Depending on the height of your risers, you may need cable or harness extensions, especially when using the +2” pullback mounting location
*If your motorcycle is equipped with a T-Sport Fairing, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees (H-AC-147-BK) (H-AC-125-BK) (H-AC-124-BK) in order to run your T-Sport Fairing with the OG Top Triple Tree.
Installation
Click here for installation instructions
Selected options: Color: Blue
The first image matches the product. Other colors or finishes may be included to show options available for order.
Description
the OG 2020-Up Softail Lowrider S & ST Drop 1" Triple Trees kit is the ultimate performance Softail front-end upgrade. It is engineered to maximize performance & rigidity featuring taller fork tube clamping sections and a thicker cross-section over the stock trees.
This Triple Trees kit will allow you to lower your fork up to 1", which will raise your bike height and provide better ground clearance. This is a great alternative for those looking for a more aggressive stance. Works well with longer 13.5" & 14" rear shocks.
It will allow you to set your Risers exactly where you want them with three mounting location options; Stock, +1'' & +2'' pullback towards the rider (+1” Adapters (H-AC-53-BK) are sold separately).
Also features wire management clamps for that clean install and factory look. Available in all colors, including chrome finishes.
Features
- 1" Drop feature
- Precision CNC machined 6061 T6 aluminum trees
- Stem axle machined from 4140Chromoly Steelfor superior strength
- Includes the OG M8 Softail Billet Fork Stem Cap (H-AC-126-BK) (H-AC-126-AL) (H-AC-126-CR) (H-AC-126-GD)
- Designed to match the OEM rake angle and triple tree offset ensuring a straightforward installation and maximizing performance
- Improved structural rigidity
- Hard Anodized finish & Chrome finishes
- Machined OG logo
- Uses standard M8 Softail bushings
- Stainless steel hardware included
- Includes two Wire management clamps (one on both sides)
- Innovative reversible Risers mounting Block allows three risers positions; stock, +1'' or +2” pullback towards the rider. +1” Adapters (H-AC-53-BK) are sold separately
Notes
- Fits all 2020 to present Softail Lowrider S (FXLRS) & ST (FXLRST) models with OEM inverted front end
- Will not fit Softail Lowrider S (FXLRS) stock headlight fairing
- Depending on the height of your risers, you may need cable or harness extensions, especially when using the +2” pullback mounting location
*If your motorcycle is equipped with a T-Sport Fairing, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees (H-AC-147-BK) (H-AC-125-BK) (H-AC-124-BK) in order to run your T-Sport Fairing with the OG Top Triple Tree.
Installation
Click here for installation instructions
Selected options: Color: Purple
The first image matches the product. Other colors or finishes may be included to show options available for order.
Description
the OG 2020-Up Softail Lowrider S & ST Drop 1" Triple Trees kit is the ultimate performance Softail front-end upgrade. It is engineered to maximize performance & rigidity featuring taller fork tube clamping sections and a thicker cross-section over the stock trees.
This Triple Trees kit will allow you to lower your fork up to 1", which will raise your bike height and provide better ground clearance. This is a great alternative for those looking for a more aggressive stance. Works well with longer 13.5" & 14" rear shocks.
It will allow you to set your Risers exactly where you want them with three mounting location options; Stock, +1'' & +2'' pullback towards the rider (+1” Adapters (H-AC-53-BK) are sold separately).
Also features wire management clamps for that clean install and factory look. Available in all colors, including chrome finishes.
Features
- 1" Drop feature
- Precision CNC machined 6061 T6 aluminum trees
- Stem axle machined from 4140Chromoly Steelfor superior strength
- Includes the OG M8 Softail Billet Fork Stem Cap (H-AC-126-BK) (H-AC-126-AL) (H-AC-126-CR) (H-AC-126-GD)
- Designed to match the OEM rake angle and triple tree offset ensuring a straightforward installation and maximizing performance
- Improved structural rigidity
- Hard Anodized finish & Chrome finishes
- Machined OG logo
- Uses standard M8 Softail bushings
- Stainless steel hardware included
- Includes two Wire management clamps (one on both sides)
- Innovative reversible Risers mounting Block allows three risers positions; stock, +1'' or +2” pullback towards the rider. +1” Adapters (H-AC-53-BK) are sold separately
Notes
- Fits all 2020 to present Softail Lowrider S (FXLRS) & ST (FXLRST) models with OEM inverted front end
- Will not fit Softail Lowrider S (FXLRS) stock headlight fairing
- Depending on the height of your risers, you may need cable or harness extensions, especially when using the +2” pullback mounting location
*If your motorcycle is equipped with a T-Sport Fairing, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees (H-AC-147-BK) (H-AC-125-BK) (H-AC-124-BK) in order to run your T-Sport Fairing with the OG Top Triple Tree.
Installation
Click here for installation instructions
Selected options: Color: Orange
The first image matches the product. Other colors or finishes may be included to show options available for order.
Description
the OG 2020-Up Softail Lowrider S & ST Drop 1" Triple Trees kit is the ultimate performance Softail front-end upgrade. It is engineered to maximize performance & rigidity featuring taller fork tube clamping sections and a thicker cross-section over the stock trees.
This Triple Trees kit will allow you to lower your fork up to 1", which will raise your bike height and provide better ground clearance. This is a great alternative for those looking for a more aggressive stance. Works well with longer 13.5" & 14" rear shocks.
It will allow you to set your Risers exactly where you want them with three mounting location options; Stock, +1'' & +2'' pullback towards the rider (+1” Adapters (H-AC-53-BK) are sold separately).
Also features wire management clamps for that clean install and factory look. Available in all colors, including chrome finishes.
Features
- 1" Drop feature
- Precision CNC machined 6061 T6 aluminum trees
- Stem axle machined from 4140Chromoly Steelfor superior strength
- Includes the OG M8 Softail Billet Fork Stem Cap (H-AC-126-BK) (H-AC-126-AL) (H-AC-126-CR) (H-AC-126-GD)
- Designed to match the OEM rake angle and triple tree offset ensuring a straightforward installation and maximizing performance
- Improved structural rigidity
- Hard Anodized finish & Chrome finishes
- Machined OG logo
- Uses standard M8 Softail bushings
- Stainless steel hardware included
- Includes two Wire management clamps (one on both sides)
- Innovative reversible Risers mounting Block allows three risers positions; stock, +1'' or +2” pullback towards the rider. +1” Adapters (H-AC-53-BK) are sold separately
Notes
- Fits all 2020 to present Softail Lowrider S (FXLRS) & ST (FXLRST) models with OEM inverted front end
- Will not fit Softail Lowrider S (FXLRS) stock headlight fairing
- Depending on the height of your risers, you may need cable or harness extensions, especially when using the +2” pullback mounting location
*If your motorcycle is equipped with a T-Sport Fairing, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees (H-AC-147-BK) (H-AC-125-BK) (H-AC-124-BK) in order to run your T-Sport Fairing with the OG Top Triple Tree.
Installation
Click here for installation instructions
Selected options: Color: Black Chrome
The first image matches the product. Other colors or finishes may be included to show options available for order.
Description
the OG 2020-Up Softail Lowrider S & ST Drop 1" Triple Trees kit is the ultimate performance Softail front-end upgrade. It is engineered to maximize performance & rigidity featuring taller fork tube clamping sections and a thicker cross-section over the stock trees.
This Triple Trees kit will allow you to lower your fork up to 1", which will raise your bike height and provide better ground clearance. This is a great alternative for those looking for a more aggressive stance. Works well with longer 13.5" & 14" rear shocks.
It will allow you to set your Risers exactly where you want them with three mounting location options; Stock, +1'' & +2'' pullback towards the rider (+1” Adapters (H-AC-53-BK) are sold separately).
Also features wire management clamps for that clean install and factory look. Available in all colors, including chrome finishes.
Features
- 1" Drop feature
- Precision CNC machined 6061 T6 aluminum trees
- Stem axle machined from 4140Chromoly Steelfor superior strength
- Includes the OG M8 Softail Billet Fork Stem Cap (H-AC-126-BK) (H-AC-126-AL) (H-AC-126-CR) (H-AC-126-GD)
- Designed to match the OEM rake angle and triple tree offset ensuring a straightforward installation and maximizing performance
- Improved structural rigidity
- Hard Anodized finish & Chrome finishes
- Machined OG logo
- Uses standard M8 Softail bushings
- Stainless steel hardware included
- Includes two Wire management clamps (one on both sides)
- Innovative reversible Risers mounting Block allows three risers positions; stock, +1'' or +2” pullback towards the rider. +1” Adapters (H-AC-53-BK) are sold separately
Notes
- Fits all 2020 to present Softail Lowrider S (FXLRS) & ST (FXLRST) models with OEM inverted front end
- Will not fit Softail Lowrider S (FXLRS) stock headlight fairing
- Depending on the height of your risers, you may need cable or harness extensions, especially when using the +2” pullback mounting location
*If your motorcycle is equipped with a T-Sport Fairing, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees (H-AC-147-BK) (H-AC-125-BK) (H-AC-124-BK) in order to run your T-Sport Fairing with the OG Top Triple Tree.
Installation
Click here for installation instructions
Selected options: Color: Gold Plating
The first image matches the product. Other colors or finishes may be included to show options available for order.
Description
the OG 2020-Up Softail Lowrider S & ST Drop 1" Triple Trees kit is the ultimate performance Softail front-end upgrade. It is engineered to maximize performance & rigidity featuring taller fork tube clamping sections and a thicker cross-section over the stock trees.
This Triple Trees kit will allow you to lower your fork up to 1", which will raise your bike height and provide better ground clearance. This is a great alternative for those looking for a more aggressive stance. Works well with longer 13.5" & 14" rear shocks.
It will allow you to set your Risers exactly where you want them with three mounting location options; Stock, +1'' & +2'' pullback towards the rider (+1” Adapters (H-AC-53-BK) are sold separately).
Also features wire management clamps for that clean install and factory look. Available in all colors, including chrome finishes.
Features
- 1" Drop feature
- Precision CNC machined 6061 T6 aluminum trees
- Stem axle machined from 4140Chromoly Steelfor superior strength
- Includes the OG M8 Softail Billet Fork Stem Cap (H-AC-126-BK) (H-AC-126-AL) (H-AC-126-CR) (H-AC-126-GD)
- Designed to match the OEM rake angle and triple tree offset ensuring a straightforward installation and maximizing performance
- Improved structural rigidity
- Hard Anodized finish & Chrome finishes
- Machined OG logo
- Uses standard M8 Softail bushings
- Stainless steel hardware included
- Includes two Wire management clamps (one on both sides)
- Innovative reversible Risers mounting Block allows three risers positions; stock, +1'' or +2” pullback towards the rider. +1” Adapters (H-AC-53-BK) are sold separately
Notes
- Fits all 2020 to present Softail Lowrider S (FXLRS) & ST (FXLRST) models with OEM inverted front end
- Will not fit Softail Lowrider S (FXLRS) stock headlight fairing
- Depending on the height of your risers, you may need cable or harness extensions, especially when using the +2” pullback mounting location
*If your motorcycle is equipped with a T-Sport Fairing, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees (H-AC-147-BK) (H-AC-125-BK) (H-AC-124-BK) in order to run your T-Sport Fairing with the OG Top Triple Tree.
Installation
Click here for installation instructions
Selected options: Color: Bronze
The first image matches the product. Other colors or finishes may be included to show options available for order.
Description
the OG 2020-Up Softail Lowrider S & ST Drop 1" Triple Trees kit is the ultimate performance Softail front-end upgrade. It is engineered to maximize performance & rigidity featuring taller fork tube clamping sections and a thicker cross-section over the stock trees.
This Triple Trees kit will allow you to lower your fork up to 1", which will raise your bike height and provide better ground clearance. This is a great alternative for those looking for a more aggressive stance. Works well with longer 13.5" & 14" rear shocks.
It will allow you to set your Risers exactly where you want them with three mounting location options; Stock, +1'' & +2'' pullback towards the rider (+1” Adapters (H-AC-53-BK) are sold separately).
Also features wire management clamps for that clean install and factory look. Available in all colors, including chrome finishes.
Features
- 1" Drop feature
- Precision CNC machined 6061 T6 aluminum trees
- Stem axle machined from 4140Chromoly Steelfor superior strength
- Includes the OG M8 Softail Billet Fork Stem Cap (H-AC-126-BK) (H-AC-126-AL) (H-AC-126-CR) (H-AC-126-GD)
- Designed to match the OEM rake angle and triple tree offset ensuring a straightforward installation and maximizing performance
- Improved structural rigidity
- Hard Anodized finish & Chrome finishes
- Machined OG logo
- Uses standard M8 Softail bushings
- Stainless steel hardware included
- Includes two Wire management clamps (one on both sides)
- Innovative reversible Risers mounting Block allows three risers positions; stock, +1'' or +2” pullback towards the rider. +1” Adapters (H-AC-53-BK) are sold separately
Notes
- Fits all 2020 to present Softail Lowrider S (FXLRS) & ST (FXLRST) models with OEM inverted front end
- Will not fit Softail Lowrider S (FXLRS) stock headlight fairing
- Depending on the height of your risers, you may need cable or harness extensions, especially when using the +2” pullback mounting location
*If your motorcycle is equipped with a T-Sport Fairing, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees (H-AC-147-BK) (H-AC-125-BK) (H-AC-124-BK) in order to run your T-Sport Fairing with the OG Top Triple Tree.
Installation
Click here for installation instructions
The first image matches the product. Other colors or finishes may be included to show options available for order.
Description
the OG 2020-Up Softail Lowrider S & ST Drop 1" Triple Trees kit is the ultimate performance Softail front-end upgrade. It is engineered to maximize performance & rigidity featuring taller fork tube clamping sections and a thicker cross-section over the stock trees.
This Triple Trees kit will allow you to lower your fork up to 1", which will raise your bike height and provide better ground clearance. This is a great alternative for those looking for a more aggressive stance. Works well with longer 13.5" & 14" rear shocks.
It will allow you to set your Risers exactly where you want them with three mounting location options; Stock, +1'' & +2'' pullback towards the rider (+1” Adapters (H-AC-53-BK) are sold separately).
Also features wire management clamps for that clean install and factory look. Available in all colors, including chrome finishes.
Features
- 1" Drop feature
-
Precision CNC machined 6061 T6 aluminum trees
- Stem axle machined from 4140Chromoly Steelfor superior strength
- Includes the OG M8 Softail Billet Fork Stem Cap (H-AC-126-BK) (H-AC-126-AL) (H-AC-126-CR) (H-AC-126-GD)
- Designed to match the OEM rake angle and triple tree offset ensuring a straightforward installation and maximizing performance
- Improved structural rigidity
- Hard Anodized finish & Chrome finishes
- Machined OG logo
- Uses standard M8 Softail bushings
- Stainless steel hardware included
-
Includes two Wire management clamps (one on both sides)
- Innovative reversible Risers mounting Block allows three risers positions; stock, +1'' or +2” pullback towards the rider. +1” Adapters (H-AC-53-BK) are sold separately
Notes
- Fits all 2020 to present Softail Lowrider S (FXLRS) & ST (FXLRST) models with OEM inverted front end
- Will not fit Softail Lowrider S (FXLRS) stock headlight fairing
- Depending on the height of your risers, you may need cable or harness extensions, especially when using the +2” pullback mounting location
*If your motorcycle is equipped with a T-Sport Fairing, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees (H-AC-147-BK) (H-AC-125-BK) (H-AC-124-BK) in order to run your T-Sport Fairing with the OG Top Triple Tree.
Installation
| Product Style | Store SKU | MFR. Product # | Availability |
|---|---|---|---|
| Black | OGMOH-AC-141-BK | H-AC-141-BK | In Stock |
This Product Fits
Fitment Disclosure
This quick reference fitment information is provided to direct you to our catalog information and the manufacturer's information. Consult manufacturer publication(s) and/or website(s) for specific fitment and application information and other important information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.
Product Description
The first image matches the product. Other colors or finishes may be included to show options available for order.
Description
the OG 2020-Up Softail Lowrider S & ST Drop 1" Triple Trees kit is the ultimate performance Softail front-end upgrade. It is engineered to maximize performance & rigidity featuring taller fork tube clamping sections and a thicker cross-section over the stock trees.
This Triple Trees kit will allow you to lower your fork up to 1", which will raise your bike height and provide better ground clearance. This is a great alternative for those looking for a more aggressive stance. Works well with longer 13.5" & 14" rear shocks.
It will allow you to set your Risers exactly where you want them with three mounting location options; Stock, +1'' & +2'' pullback towards the rider (+1” Adapters (H-AC-53-BK) are sold separately).
Also features wire management clamps for that clean install and factory look. Available in all colors, including chrome finishes.
Features
- 1" Drop feature
-
Precision CNC machined 6061 T6 aluminum trees
- Stem axle machined from 4140Chromoly Steelfor superior strength
- Includes the OG M8 Softail Billet Fork Stem Cap (H-AC-126-BK) (H-AC-126-AL) (H-AC-126-CR) (H-AC-126-GD)
- Designed to match the OEM rake angle and triple tree offset ensuring a straightforward installation and maximizing performance
- Improved structural rigidity
- Hard Anodized finish & Chrome finishes
- Machined OG logo
- Uses standard M8 Softail bushings
- Stainless steel hardware included
-
Includes two Wire management clamps (one on both sides)
- Innovative reversible Risers mounting Block allows three risers positions; stock, +1'' or +2” pullback towards the rider. +1” Adapters (H-AC-53-BK) are sold separately
Notes
- Fits all 2020 to present Softail Lowrider S (FXLRS) & ST (FXLRST) models with OEM inverted front end
- Will not fit Softail Lowrider S (FXLRS) stock headlight fairing
- Depending on the height of your risers, you may need cable or harness extensions, especially when using the +2” pullback mounting location
*If your motorcycle is equipped with a T-Sport Fairing, you will need the T-Sport Fairing Mounting Kit for OG 2020-Up Softail Low Rider S & ST Top Triple Trees (H-AC-147-BK) (H-AC-125-BK) (H-AC-124-BK) in order to run your T-Sport Fairing with the OG Top Triple Tree.
Installation
Part Numbers
| Product Style | Store SKU | MFR. Product # | Availability |
|---|---|---|---|
| Black | OGMOH-AC-141-BK | H-AC-141-BK | In Stock |
Fitment
This Product Fits
Fitment Disclosure
This quick reference fitment information is provided to direct you to our catalog information and the manufacturer's information. Consult manufacturer publication(s) and/or website(s) for specific fitment and application information and other important information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.