Skip to content
Free Shipping on orders over $69.99 to the continental 48 (Alaska & Hawaii orders, call 402-214-0706 to order).
All products have accurate in stock quantities listed, if it shows in stock it’s actually in stock!
Free Shipping on orders over $69.99 to the continental 48 (Alaska & Hawaii orders, call 402-214-0706 to order).
All products have accurate in stock quantities listed, if it shows in stock it’s actually in stock!
Feuling Oil Pump Corp.

Feuling Oil Pump Corp. Race Series® Pump - 7199 For Harley Motorcycles 2017-2026

MPN: 7199 SKU: 0932-0231
Feuling Oil Pump Corp.

Feuling Oil Pump Corp. Race Series® Pump - 7199 For Harley Motorcycles 2017-2026

MPN: 7199 SKU: 0932-0231
Availability:
32 in stock, ready to be shipped
Note:Has 30% more pressure gear volume over stock, 53% more scavenge gear volume over stock and 42% more scavenge volume with port sizing, matched passages and holes to the engine case.Features Increase oil pressure, oil volume, engine oil flow and return oil scavenging Quieter and smoother engine operation Engine temperatures run 15°-25° cooler Oil temperatures run 15°-30° cooler 10-30 more psi of oil pressure Reduces wet sumping, blow by and oily air cleaners Test results show 2 horsepower gain and 2 ft/lbs of torque gain to the rear wheel on M-Eight Includes a billet 7075 hard anodized oil pump which is 50% harder and stronger than the factory pump holding tighter tolerances under temperature (Race Series® M-Eight oil pumps have deeper scavenge kidneys when compared to the HP+ kidneys for increased scavenge volume) Also includes Feuling® High Flow billet camplate made from 7075 aluminum; which is 50% harder and stronger than the factory or Feuling® OE+ camplates Increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages, including matching the oil portholes throughout the camplate to the portholes in the engine case, which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings Oil pumps are bench-tested; the relief valve is seated and sealed to a minimum of 30 psi with full pop-off at 55-60 psi Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function Feuling® oil pump and camplate combination eliminates common pressure and scavenge issues associated with the factory oiling systems Feuling® M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing seal Made in the USA Feuling® test results show as much as 50% reduction of engine sump oil level. The M-Eight oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank. Specs Product Name Pump Type Oil Model Race Series® Color/Finish Red Material Aluminum Units Kit Riding Style Street
Original price $929.95 - Original price $929.95
Original price
$929.95
$929.95 - $929.95
Current price $929.95

Product Details

Note:
  • Has 30% more pressure gear volume over stock, 53% more scavenge gear volume over stock and 42% more scavenge volume with port sizing, matched passages and holes to the engine case.

Features

  • Increase oil pressure, oil volume, engine oil flow and return oil scavenging
  • Quieter and smoother engine operation
  • Engine temperatures run 15°-25° cooler
  • Oil temperatures run 15°-30° cooler
  • 10-30 more psi of oil pressure
  • Reduces wet sumping, blow by and oily air cleaners
  • Test results show 2 horsepower gain and 2 ft/lbs of torque gain to the rear wheel on M-Eight
  • Includes a billet 7075 hard anodized oil pump which is 50% harder and stronger than the factory pump holding tighter tolerances under temperature (Race Series® M-Eight oil pumps have deeper scavenge kidneys when compared to the HP+ kidneys for increased scavenge volume)
  • Also includes Feuling® High Flow billet camplate made from 7075 aluminum; which is 50% harder and stronger than the factory or Feuling® OE+ camplates
  • Increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages, including matching the oil portholes throughout the camplate to the portholes in the engine case, which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings
  • Oil pumps are bench-tested; the relief valve is seated and sealed to a minimum of 30 psi with full pop-off at 55-60 psi
  • Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function
  • Feuling® oil pump and camplate combination eliminates common pressure and scavenge issues associated with the factory oiling systems
  • Feuling® M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing seal
  • Made in the USA
  • Feuling® test results show as much as 50% reduction of engine sump oil level.
  • The M-Eight oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank.

Specs

Product Name Pump
Type Oil
Model Race Series®
Color/Finish Red
Material Aluminum
Units Kit
Riding Style Street

Product Description
Note:
  • Has 30% more pressure gear volume over stock, 53% more scavenge gear volume over stock and 42% more scavenge volume with port sizing, matched passages and holes to the engine case.

Features

  • Increase oil pressure, oil volume, engine oil flow and return oil scavenging
  • Quieter and smoother engine operation
  • Engine temperatures run 15°-25° cooler
  • Oil temperatures run 15°-30° cooler
  • 10-30 more psi of oil pressure
  • Reduces wet sumping, blow by and oily air cleaners
  • Test results show 2 horsepower gain and 2 ft/lbs of torque gain to the rear wheel on M-Eight
  • Includes a billet 7075 hard anodized oil pump which is 50% harder and stronger than the factory pump holding tighter tolerances under temperature (Race Series® M-Eight oil pumps have deeper scavenge kidneys when compared to the HP+ kidneys for increased scavenge volume)
  • Also includes Feuling® High Flow billet camplate made from 7075 aluminum; which is 50% harder and stronger than the factory or Feuling® OE+ camplates
  • Increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages, including matching the oil portholes throughout the camplate to the portholes in the engine case, which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings
  • Oil pumps are bench-tested; the relief valve is seated and sealed to a minimum of 30 psi with full pop-off at 55-60 psi
  • Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function
  • Feuling® oil pump and camplate combination eliminates common pressure and scavenge issues associated with the factory oiling systems
  • Feuling® M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing seal
  • Made in the USA
  • Feuling® test results show as much as 50% reduction of engine sump oil level.
  • The M-Eight oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank.

Specs

Product Name Pump
Type Oil
Model Race Series®
Color/Finish Red
Material Aluminum
Units Kit
Riding Style Street

Part Numbers
Store SKU MFR. Product # Availability
0932-0231 7199 In Stock
Fitment
This product is vehicle specific. Select your vehicle to confirm fitment.

This Product Fits

Fitment Disclosure

This quick reference fitment information is provided to direct you to our catalog information and the manufacturer's information. Consult manufacturer publication(s) and/or website(s) for specific fitment and application information and other important information. This fitment information is based upon the stock version of the motorcycle or unit referenced and any accessory added or other modification could invalidate the quick reference information provided.

Note:
  • Has 30% more pressure gear volume over stock, 53% more scavenge gear volume over stock and 42% more scavenge volume with port sizing, matched passages and holes to the engine case.

Features

  • Increase oil pressure, oil volume, engine oil flow and return oil scavenging
  • Quieter and smoother engine operation
  • Engine temperatures run 15°-25° cooler
  • Oil temperatures run 15°-30° cooler
  • 10-30 more psi of oil pressure
  • Reduces wet sumping, blow by and oily air cleaners
  • Test results show 2 horsepower gain and 2 ft/lbs of torque gain to the rear wheel on M-Eight
  • Includes a billet 7075 hard anodized oil pump which is 50% harder and stronger than the factory pump holding tighter tolerances under temperature (Race Series® M-Eight oil pumps have deeper scavenge kidneys when compared to the HP+ kidneys for increased scavenge volume)
  • Also includes Feuling® High Flow billet camplate made from 7075 aluminum; which is 50% harder and stronger than the factory or Feuling® OE+ camplates
  • Increases oil flow and volume by enlarging the oil pump reservoirs and critical oil passages, including matching the oil portholes throughout the camplate to the portholes in the engine case, which increases engine oil flow to the lifters, piston cooling jets, crankshaft and rod bearings
  • Oil pumps are bench-tested; the relief valve is seated and sealed to a minimum of 30 psi with full pop-off at 55-60 psi
  • Increased oil volume from the larger gears and properly sized passages along with the pressure relief valve seat and seal from these oil pumps is essential for proper oiling system function
  • Feuling® oil pump and camplate combination eliminates common pressure and scavenge issues associated with the factory oiling systems
  • Feuling® M-Eight oil pumps have the groove machined on the back cover to accept the factory crank bearing seal
  • Made in the USA
  • Feuling® test results show as much as 50% reduction of engine sump oil level.
  • The M-Eight oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank.

Specs

Product Name Pump
Type Oil
Model Race Series®
Color/Finish Red
Material Aluminum
Units Kit
Riding Style Street